To Next PageTo Next PageWhy is the water temperature wrong in my JLA 98?
If the water temperature is incorrect in your JLA washer: * Make sure that the controls are properly set. * Check fill hoses to ensure the hot faucet hose is connected to the hot mixing valve (indicated with “H” on the valve bracket) and the cold faucet is connected to the cold mixing valve (indicated with “C” on the valve bracket). * Make sure the laundry room water heater is adjusted properly.
Crucial safety precautions and warnings for operating the washing machine safely.
Provides the recommended order for performing installation tasks correctly.
Guide for electrical hookup for washers equipped with a heater element.
Wiring instructions for connecting to a 230V single-phase electrical supply.
Wiring diagram and steps for a 400V 3-phase WYE power connection.
Wiring diagram and steps for a 230V 3-phase DELTA power connection.
Guide for electrical hookup for washers not equipped with a heater.
Procedures to ensure the washer is correctly positioned and level for stable operation.
Final steps for connecting the washer to the main electrical supply.
Specifications for voltage, frequency, and amperage needed for the washer.
Critical safety guidelines for proper electrical grounding connections.
How to select fabric types and wash temperatures using the control panel.
Lists common washer problems and provides potential causes and solutions.
General