What causes BMS fault code 05 - Overcurrent Charge in JLG X600AJ-X20JP?
BMS fault code 05, "Overcurrent Charge," in JLG Boom Lifts can occur if the lithium pack is warm, one cell is at the maximum voltage, and the battery charger is suddenly connected, causing a current impulse to be supplied to the pack.
General| Power Source | Diesel |
|---|---|
| Gradeability - 4 Wheel Drive | 45% |
| Platform Height | 18.29 m |
| Horizontal Reach | 12.19 m |
| Lift Capacity | 227 kg |
| Overall Width | 2.44 m |
| Engine Power | 55 kW |
Provides general safety instructions and introduces the Lithium ION system.
Details the revision history of the manual.
Details the capacities of different Lithium ION battery systems and cell features.
Illustrates the physical layout of battery pack components for various models.
Explains the 12V power distribution system and its components.
Details the theory of operation for power pack components like BMS, Inverter, etc.
Describes the functions and types of Battery Management Systems used.
Details the characteristics, voltage, and capacity of Lithium ION battery cells.
Explains the cooling system for the Lithium ION battery pack and temperature effects.
Describes the 3rd generation heater system and its functionality.
Details the function and types of Lithium ION battery pack chargers.
Explains the function of different relays within the battery system.
Provides instructions for overriding the electric motor in emergency situations.
Explains how fault codes are displayed and accessed on the remote control.
Provides troubleshooting steps for common issues with 1st and 2nd Gen battery systems.
Details how to use the RamHino tool for diagnostics and data analysis.
Guides on starting and stopping data logging for Lithium system diagnostics.
To Next Page
