Jntech JNP Series - Installation Procedure; Prepare Installation Tools; Installation Steps

23
4 Installation Procedure
4.1 Prepare Installation Tools
The following tools will be needed during inverter installation and wire
connection. You also can choose the right tools according to your own
experience.
Table4-1 Installation tools list
Sketch map
Name
Recommend
specification
Function
Wire crimpers
M2.5~M8
For crimping of cold
terminals.
Electric drill
Ф8
Used for inverter
installation plate fixed hole
drilling.
monkey
wrench
/
For fixing nuts
Inner
hexagon
spanner
5#
Used for disassembly and
assembly of inverter cover
panel.
4.2 Installation Steps
Tools ready, follow these steps to install.
Table4-2 Installation process