Jntech JNP Series - Page 82

82
3. Pipe
system
design is
not
reasonable.
frequently,
please contact
SUPPLIER.
Fault111
Temperature
sensor fault
Inverter shut
down.
Sensor not
connects
proper or
damaged.
If this happen
frequently,
please contact
SUPPLIER.
Fault112
Short circuit
fault
(Nonrecoverab
le)
Inverter
shutdown,
non-recover
malfunction.
No
automatically
restart, only if
recharged.
Output wire
short
circuit.
1. Please check
if there is short
circuit in output
wires.
2. If this happen
frequently,
please contact
SUPPLIER.
Fault115
Output phase
lose
Inverter
shutdown and
will restart
automatically
after the fault
disappears.
Phase loss
in inverter
output.
1. Please check
if the output
wires are proper
connected and
fixed.
2. If this happen
frequently,
please contact
the supplier.