Jofemar Vision Snack Plus - Configurable Alarms; List of Programmable Alarms; Advertising Message Programming; Setting the Rotating Advertising Message

vision Snack Plus/Easy Combo // Vending
MNP86V03GBV00 Date: 2010/06/14 Rev. 0 PAGE 51 OF 62
The alarms that can be programmed are as follows:
[46] PROGRAMMING THE ADVERTISING MESSAGE
At this address you can program a message of up to 80 characters that rotates from right
to left on the top line of the display when on standby without credit. When you access
this address at the bottom line you will see the first 16 characters of the message
currently programmed and on the top line a descriptive text of the use of some keys. The
cursor will be located on the character that you can change.
Pressing key “C” once will delete the character highlighted by the cursor, that is, it will
write a blank space.
If you continue to press this key, the next characters on the left will be deleted and
the cursor position will change.
After a memory reset the default advertising message will be programmed.
1 2 3+ 4- c-del
SH BUTTON TO D
1 2 3+ 4- c-del
puSH BUTTON TO D
1 2 3+ 4- c-del
QuSH BUTTON TO D
1 2 3+ 4- c-del
uSH BUTTON TO D
1 2 3+ 4- c-del
p
SH BUTTON TO D
1 2 3+ 4- c-del
uSH BUTTON TO D
THERMOMETER
FAULTY
SOLD OUT
SELECTION
COIN MECHANISM
FAULTY
NO
CHANGE
NO MOTORS
DETECTED
PRODUCT DETECTOR
FAULTY
EXTERIOR DOOR
OPEN
TEMPERATURE HAS
EXPIRED PRODUCT
E2PROM
FAILED
EXPIRATION CTRL.
DOES NOT RESPOND
KEYBOARD
FAULTY
RECOVERY MOTOR
FAULTY
PROGRAMMING
MESSAGE
Programmed
alarms:
1 2 3+ 4- c-del