John Bean EHP System IV-E - Specifi Cations; Machine Dimentions; Accessories

12
1.3-1
1.4-1
1.2 Specifi cations
Electric-air tire changer for car, light commercial vehicle
and motorcycle tires designed for one-piece rims.
Operation temperature range +41/+122 F (+5/50 °C)
Shipping Weight lbs 610 (227 kg)
Air pressure required psi 110-170 (8-12 bar)
Bead breaker force lbs 3300 (15 kN)
Electrical Requirements: 115 V AC, 60Hz Single
Phase
Motor kW 0.75 (1 HP)
Max. torque ftxlb 740 (1000
Nm)
Max. wheel diameter 40” (1016 mm)
Max. wheel width 17”
Rim diam. outside locking 12”-26”
Rim diam. inside locking 14”-28”
Motorcycle wheels with adapters 10”-25”
1.3 Dimensions of the Machine (Fig.1.3-1)
1.4 Accessories
(Fig. 1.4-1)
A series of accessories are usually available for the
machine. All accessories are indicated on the website:
http://service.snapon-equipment.net/
After accessing the website, proceed as follows:
- Select Accessory Plan (1).
- Select the reference brand in the ! eld
Brands (2).
- Select the Type of product “Tyre changers” in the ! eld
Product lines (3).
- Open the ! eld Model (4) and select the speci! c
machine model among the ones in the list.
- Enter “SEARCH” (5) to display the list of
available accessories
.
• Use the codes in the list for the purchase orders.