Johnson Amplification Integrated Modeling Amplifier - RESET PRESET (20 H); RESET DEVICE (21 H); RESET FACTORY SETTINGS (22 H); REQUEST USER DEFAULTS (13 H)

RESET PRESET (20h)
SYS_HEAD, 20(h), F7(h)
The Reset Preset procedure causes the Millennium to reload the current saved program.
RESET DEVICE (21h)
SYS_HEAD, 21(h), F7(h)
The Reset Device procedure causes the Millennium to reboot the software as if the power had been turned off, and then back on. If edits have
been made to the current preset without saving, they will be lost.
RESET FACTORY SETTINGS (22h)
SYS_HEAD, 22(h), F7(h)
The Reset Factory Settings procedure causes the Millennium to reload a sections of the EPROM factory defaults and perform a hard reset.
REQUEST USER DEFAULTS (13h)
SYS_HEAD, 13(h), yy1, yy2, zz1, zz2 F7(h)
When a Request User Default procedure is received, the Millennium will respond with a Receive User Defaults procedure.
yy= effect ID #
zz= index map max = 5
FX ID # = 255
RECEIVE USER DEFAULTS (14h)
SYS_HEAD,14(h), yy1, yy2, zz1, zz2 F7(h)
The Receive User Defaults procedure is used to receive User Defaults.
yy= effect ID #
zz= index map max = 5
FX ID # = 255
Johnson Millennium
User Guide
Section -7 Appendix
95