When do I use a detuner? The detuner falls into the same guidelines as the chorus effect. It works with just about everything; It is ideal
for thickening up a rhythm guitar track. Remember to experiment with the delay parameters if you are looking for a wider detuning sound.
Adding 30-60 ms of delay to the detuner's voices that are panned hard to one side (while not delaying the other side) will change the
detuner's stereo imaging greatly.
Detuner Parameters
FX: Lvl Controls the signal input level fed to the module. Ranges from Off to 100%.
Dry: Lvl Controls the level of the dry (uneffected) signal. Ranges from Off to 100%.
Balance Controls the positioning of the dry signal in the stereo soundfield. Ranges from -99 (all left) to 99 (all right).
Dtn A - B Controls the detuning amount for detuner voices A and B. Higher detune settings produce a more dissonant sound.
Ranges from -50% to 50%.
Dtn C - D Controls the detuning amount for detuner voices C and D. Ranges from -50% to 50%.
Dtn E -H Controls the detuning amount for detuner voices E through H. Ranges from -50% to 50%.
Dly A - B Controls the amount of time before detuner voices A and B are heard. Higher delay time settings produce a short
slapback delay effect. Ranges from 0 to 60 milliseconds.
Dly C - D Controls the amount of time before detuner voices C and D are heard. Ranges from 0 to 60 milliseconds.
Dly E - H Controls the amount of time before detuner voices E through H are heard. Ranges from 0 to 60 milliseconds.
Out A - B Adjusts the overall level of detuner voice A or B. Ranges from Off to 100%.
Pan A - B Controls the stereo soundfield placement of detuner voice A or B. Ranges from -99 (all left) to 99 (all right).
Out C - D Adjusts the overall level of detuner voice C or D. Ranges from Off to 100%.
Pan C - D Controls the stereo soundfield placement of detuner voice C or D. Ranges from -99 (all left) to 99 (all right).
Out LA - LB Adjusts the left side level of detuner voice A or B. Ranges from Off to 100%.
Out RA - RB Adjusts the right side level of detuner voice A or B. Ranges from Off to 100%.
Spread Controls the width of the effect’s stereo imaging. The higher the setting, the wider the image. The lower the setting,
the more monophonic the effect becomes. Ranges from 1 to 10.
Delays
A delay produces discrete, repeating echoes of the source material at a specified interval. In digital delays, the input signal is "sampled" or
Johnson Millennium
User Guide
Section - 4 Editing Modules
49
To Next Page
Loading...
