Other Footswitch Functions
The footswitches on the J-12 can be assigned to do several functions. This is done through the Foot Controller menus in the Utility section of
the Millennium. These functions include:
Toggle MIDI CC: This function allows you to send MIDI Continuous Controller (CC) information out the MIDI port while the footswitch
still maintains its ability to control a parameter directly. When assigned to a footswitch, CC values 0 or 127 are sent. CC numbers 0 through
127 are available.
Exp CC send: The Expression pedals of the J-12 can also send MIDI CC data to other MIDI devices.
The procedure for setting up a MIDI CC toggle footswitch function is as follows:
1. Press the <Utility> button once. The display appears something like this:
2. Turn the <Page> knob to until you reach page 10 and the display reads:
3. Turn the <2> knob to select the bank in which the CC toggle is to used. Once the bank is selected, use the <3> knob to select the
footswitch to be used. The display reads:
4. The display now shows that footswitch 6 in bank 1 is set to toggle CCs. Take notice that (from the factory) when footswitches 6-0 are
selected, you can assign that footswitch a CC number from 0-127 by turning the <4> knob.
To Next Page
Loading...