Storing the Preset
1. When you have the name as you want it to appear, press the <Store> button again. The top line of the display appears something like
this:
This screen allows you to select the location of the new Preset. Note that when the preset is stored, it is stored in the User bank of presets
because factory presets cannot be overwritten.
2. Use the <2> knob or the <Preset/Effect> wheel to select the preset number where you want to store the new preset.
3. Press the <Store> button again. The top line of the display briefly reads:
after which you are taken to the preset you have just stored.
The newly created preset is now loaded, and can now be recalled at any time.
4. To abort the procedure, push either the <Preset> button to take you to Preset mode, the <Edit> button to take you to FX Edit mode, or
the <Utilities> button to take you to Utility mode, depending upon which mode you want to enter.
To Next Page
Loading...
