Figure 3: DLK0350 dimensions, mm (in.)
Applications
The DLK0350 Local Controller Display is designed for
use with controllers that do not have an integral display.
You can install the display on the front panel of the
enclosure that houses the controller or you can use the
DLK0350 display as a portable device by plugging it into a
compatible controller while on-site. You can commission
the controller conveniently from the Sensor Actuator (SA)
Bus port on the bottom of the display without having to
open the enclosure.
The display features a back-lit color LCD and tactile
navigation keypad. You can conveniently adjust heating
and cooling setpoints, view the room or outside air
temperatures, select mode of operation (Day/Night), view
trends and alarms, and much more. For more information
about how to operate the DLK0350 Local Controller
Display, refer to the Local Controller Display User Guide
(LIT-12013984).
Customized display content and
settings
You can customize the information that is shown in the
display using the Controller Configuration Tool (CCT). With
CCT, you can also define the order and groupings of the
information, define which points are read-only and cannot
be commanded using the display, set the authorization
for the display, and set the display preferences, such as
timeout settings. For more information about how to
configure the display, refer to CCT Help (LIT-12011147).
Ordering information
Table 1: DLK0350 ordering information
Product code number Description
F4-DLK0350-0 F4-DLK0350-0 Local Controller Display
Accessories
Table 2: DLK0350 accessories
Product code number Description
TL-PWRKIT-0A Optional power supply; for North American power outlets only.
TL-PWRKIT-0D Optional power supply; includes interchangeable blades for North America, Europe, UK,
Australia, and China power outlets.
ACC-TBKPWFCSA-0 Replacement terminal block kit.
Technical specifications
F4-DLK0350 Product Bulletin 3
To Next Page
Loading...
Need help?
General
