Accessories
Table 10: Accessories Ordering Information
Product Code Number Description
MS-DIS1710-0 Local Controller Display (for use with MS-FEC2611 model only)
TP-2420 Transformer, 120 VAC Primary to 24 VAC secondary, 20 VA, Wall Plug
Y65T31-0
Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 40 VA, Foot Mount, 8 in. Primary
Leads and Secondary Screw Terminals, Class 2
Note: Additional Y6x-x Series transformers are also available. Refer to the Series Y63, Y64,
Y65, Y66, and Y69 Transformers Product Bulletin (LIT-125755) for more information.
AS-XFR050-0 Power transformer (Class 2, 24 VAC, 50 VA maximum output), no enclosure
AP-TBK4SA-0 Replacement SA Bus Terminal Blocks, 4-Position, Brown, Bulk Pack of 10
AP-TBK4FC-0 Replacement FC Bus Terminal Blocks, 4-Position, Blue, Bulk Pack of 10
AP-TBK3PW-0 Replacement Power Terminal Blocks, 3-Position, Gray, Bulk Pack of 10
WNC1800/ZFR182x Pro Wireless
field Bus System
This system is used for installations that support BACnet/IP but can also coexist with the ZFR1800
Series when installed under the same supervisor (i.e.,network engine). Refer to the WNC1800/
ZFR182x ProSeries Wireless Field Bus System Product Bulletin (LIT-12012320)for a list of available
products.
ZFR1800 Series Wireless Field Bus
System
This system is used for installations that only support BACnet MS/TP. Refer to the ZFR1800 Series
Wireless Field BusSystem Product Bulletin (LIT-12011336) for a list of available products.
NS Series Network Sensors
Refer to the NS Series Network Sensors Product Bulletin (LIT-12011574) for specific sensor model
descriptions.
WRZ Series Wireless Room Sensors
Refer to the WRZ Series Wireless Room Sensors Product Bulletin (LIT-12000653) for specific sensor
model descriptions.
FEC26 Field Equipment Controllers Installation Guide22
To Next Page
Loading...
Need help?
General
