Johnson Controls FW-14 - Technical Specifications

Technical specifications
Table 5: FW-14 UL input, output, and communication ratings
Description Specification Terminal
• 24 VAC, plus or minus 5%
• 24 VDC, plus 20% or minus 15%
Power supply
12 VA, Class 2
H and G
Voltage 0 VDC to 10 VDC, Class 2Universal
inputs
Resistance 500 ohm to 500,000 ohm
3% accuracy UI1 and COM to
UI8 and COM
24 VAC, 0.5 A pilot duty, Class 2, dry-contact relay outputDigital outputs
24 VDC, 0.5 A pilot duty, Class 2, dry-contact relay output
DO1 to DO2
Voltage 0 V to 10 V, Class 2
Minimum load
independence
2,000 ohm
Universal
outputs
Maximum current draw 5 mA
3% accuracy AO1and COM to
AO4 and COM
D+
D-
EIA/RS-485 Class 2
S
ENET0Ethernet ports Class 2
ENET1
Table 6: FW-14 technical specifications
Description Specification
Controller processor and memory specifications
Main processor MIPS 580Mhz
Processor ARM Cortex 48 Mhz
Flash memory 32 MB
RAM 128 MB
Product temperature and humidity specifications
Operating temperature 0°C to 50°C (32°F to 122°F)
Storage temperature -20°C to 65° (-4°F to 150°F)
Operating humidity 10% to 90% relative humidity, non-condensing
Physical specifications
Dimension 191mm x 104 mm x 44mm (7.5in. x 4.1in. x 1.7in)
Material UL Approved
Weight 410 g (14.5 oz)
Wireless ratings
Standard IEEE 802.11
Band b/g/n
Frequency range 2412 MHz to 2462 MHz
Antenna 2.2 dBi Dipole
Transmission power 18.98 dBm EIRP
FW-14 Quick Start Guide 11