Johnson Controls GLAS Technical Bulletin

GLAS Smart Thermostat Technical Bulletin
12
System Modes
Heat
Activates your heating when the temperature in the space falls below your pre-selected setpoint range.
Cool
Activates your cooling when the temperature in the space rises above your pre-selected setpoint range.
Auto
Your system will switch between heating and cooling as necessary to keep the space between the desired
setpoints.
Off
The system will not heat or cool unless safety temperatures are reached.
Fan
Auto
The fan turns on when needed by the heating and cooling system.
On
The fan turns on and you can select the runtime or Stay On.
Support Factory reset Reset to factory settings
Restart Restart thermostat
Customer support Phone Number
Tech contact info Name
Phone number
Device info IP address
MAC address
Model number
Serial number
Software update Checking for updates
Date of last update
System image version
System updating
Cortana version
User interface version
Control engine version
Device management version
Table 5: Settings Menus and Submenus
Menu Submenu 1 Submenu 2

Johnson Controls GLAS Specifications

General

Brand	Johnson Controls
Model	GLAS
Category	Thermostat
Language	English