Johnson Controls TEC Series - User Manual

Product Bulletin
Issue Date September 2, 2003
TEC2100 Series Networked Thermostats
The TEC2100 Series of thermostats is a family of
highly advanced thermostats specifically designed for
control of equipment such as rooftop units (with and
without economizers), heat pumps, and single and
multi-stage heating/cooling equipment. The TEC2100
features Metasys® system N2 Bus communication
capability that enables remote monitoring and
programmability for efficient space control. The
TEC2100 used an intuitive, plain text, menu driven
backlit display that makes setup and operation quick
and easy.
The TEC Series includes four models: Single-stage
(TEC2101-1), Heat Pump (TEC2102-1), Multi-stage
(TEC2103-1), and Economizer (TEC2104-1). All
thermostats use a unique proportional control
algorithm that virtually eliminates temperature offset
associated with traditional differential-based
thermostats.
Figure 1: TEC2100 Series Thermostat
Features and Benefits
❑ Metasys N2 Open
Communication
Provides compatibility with a proven
communication network; N2 Bus is widely
accepted by Heating, Ventilating, and Air
Conditioning (HVAC) control suppliers
❑ Liquid Crystal Display
(LCD)
Provides real-time control status of the
environment in easy-to-read plain text
messages
❑ Backlit Display Incorporates a low level back light during
normal operation which brightens during user
interaction
❑ Five Easy-to-Use Interface
Keys
Allow for easy adjustment of the thermostat’s
many options (eliminates the need for
dipswitches)
❑ Two Digital Inputs Provides additional inputs for service or filter
alarms
❑ Over Twenty Configurable
Parameters
Enables the thermostat to adapt to any
installation
❑ Economizer Output
(TEC2104-1)
Controls economizer operation for single and
multi-stage unitary rooftop equipment
© 2003 Johnson Controls, Inc. 1
Code No. LIT-1201660 www.johnsoncontrols.com

Johnson Controls TEC Series Specifications

General

Category	Thermostat
Brand	Johnson Controls
Power Source	24 VAC
Display	LCD
Voltage	24 VAC
Series	TEC
Type	Digital
Mounting	Wall
Communication	N2
Compatibility	HVAC Systems
Temperature Range	40°F to 90°F (32°C)
Programmable	Yes

Summary

Features and Benefits

Metasys N2 Open Communication

Provides compatibility with a proven communication network; N2 Bus is widely accepted by HVAC control suppliers.

Economizer Output (TEC2104-1)

Controls economizer operation for single and multi-stage unitary rooftop equipment.

Product Overview

Key Configuration and Operation Features

Highlights features like concealed key access, LED status indicators, temporary occupancy, frost protection, and economizer functions.

Product Information

Ordering Information

Lists code numbers, descriptions, and applications for the TEC2100 series thermostats.

Technical Specifications

Product and Power Requirements

Details product models, power requirements, and relay contact ratings for the TEC2100 series.

Measurement and Environmental Specifications

Covers thermostat measurement ranges, control accuracy, and ambient operating/storage conditions.

Compliance and Certifications