Johnson Controls NAE55 - User Manual

NAE55/NIE55 Installation Guide
Application
The Metasys
®
Network Automation Engine (NAE)
and Network Integration Engine (NIE) are Ethernet-
based, supervisory devices that connect BAS
networks to IP networks. NAEs and NIEs monitor
and control field-level building automation devices,
including HVAC equipment, lighting, security, and
fire safety equipment. Use this document to install
the NAE or NIE. Figure 1 shows the NAE55 engine,
Figure 2 shows the NIE55 engine.
Figure 1: NAE55 Network Engine
Figure 2: NIE55 Network Engine
The NAE offers various integration options. Ethernet
network integrations include the following options:
• Johnson Controls and 3rd party BACnet/IP devices
• Simplex
®
Fire Alarm Control Unit (FACU)
• Cree
®
SmartCast
®
Lighting Control
• Molex
®
Lighting Control
• Tyco
®
C•CURE
®
9000 or victor
®
Video
Management
• Modbus TCP/IP
• KNX IP
Field Bus integrations include the following options:
• BACnet MS/TP
• N2 Bus
• LonWorks
®
• Modbus Remote Terminal Unit (RTU)
• Meter Bus (M-Bus)
• Zettler
®
Fire Panel
Important: For any other custom integrations,
contact your local Systems Integration Services
(SIS) team before an upgrade. Updated drivers
are available on request.
In this installation guide, the term network engine
applies to any NAE55 or NIE55 model, unless
otherwise stated. For installation instructions on
the secure NAE55, refer to the NAE-S Installation
Instructions (Part No. 24-10051-108). For installation
instructions on the NAE55s that are approved
for Metasys system smoke control applications,
refer to the NAE55 Installation Instructions (Part No.
24-10051-00132).
Note: The NIE55 network engine is available
at Release 9.0, but beginning at Release 10.0,
the NIE55 is no longer offered. However, repair
models of the NIE55 network engine are still
available. To order a repair NIE55, specify MS-
NIE5510-703 (no modem) or MS-NIE5511-703
(with modem).
*241005143U*
Part No. 24-10051-43 Rev. U
Releases 9.0, 10.0, 10.1
2019-10-14
(barcode for factory use only)
MS-NAE55xx-3,MS-NIE55xx-3

Johnson Controls NAE55 Specifications

General

Brand	Johnson Controls
Model	NAE55
Category	Network Hardware
Language	English

Summary

Product Overview and Application

Integration Options

Details Ethernet and Field Bus integration capabilities.

NIE55 Product Status

Notes NIE55 discontinuation and repair model availability.

Installation and Mounting

Installation Guidelines

Covers safe transport, handling, and required tools.

Physical Dimensions and Features

Outlines unit dimensions and key physical characteristics.

Mounting Considerations

Guides on selecting optimal location and mounting techniques.

Mounting Procedures

Step-by-step guide for wall and DIN rail installation.

Wiring and Connectivity

Wiring Overview

Details power supply requirements and Ethernet port function.

Communication Interfaces

Describes FC Bus, LonWorks, Serial, and USB interfaces.

Wiring Precautions and Safety

Highlights critical safety warnings and wiring precautions.

Bus and Network Connectivity

Covers MS/TP, N2 Bus, LonWorks, Modbus, M-Bus, KNX connections.

System Setup, Operation, and Troubleshooting

System Setup

Step-by-step guide to install the data protection battery.

System Configuration and Power Management

Covers setting EOL switches and power control.

Startup, LEDs, and Diagnostics

Explains LED indications, startup sequence, and diagnostics.

Network Integration Rules

Outlines rules for Ethernet and BACnet MS/TP integrations.

Protocol Specific Rules

Specifies rules for Modbus RTU and M-Bus protocols.

Network Segment Limits

Details device limits for M-Bus and LonWorks segments.

Dual Trunk Options

Lists supported dual trunk configurations for NAE55.

Product Specifications, Ordering, and Compliance

Repair and Ordering Information

Information on repairs, ordering products, and accessories.

MS-NAE55 xx-3 Specifications

Detailed technical specifications for NAE55xx-3 models.

MS-NIE551 x-3 Specifications

Detailed technical specifications for NIE551x-3 models.

Compliance, Warranty, and Contacts

Covers compliance, warranty, and contact information.