Configuring P2000 Central Server Enterprise Configuration
2-28 24-10515-21 Rev. –
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
5. In the lower window pane verify that the commands were completed
successfully.
6. Click the New Query button.
7. Type in the following command:
exec dbo.spP2000ReplicationSetAllTablesIDRange XX, YY
Where XX is the beginning of the ID range, and YY is the end of the ID range.
See Table 2-1 for reference.
8. Click the “Parse Query” button to check integrity of the script.
9. Click the ! Execute button
.
It is recommended that you scroll down and
review error messages under the
Messages tab. Resolve any reported problems before proceeding.
10. Close the Microsoft SQL Server Managemen
t Studio window.
Congratulations, you have successfully defined the required publications for
your
P2000 Enterprise Solution.
To Next Page
Loading...
