VPN/DSL Security Option Configuration
24-10618-155 Rev. A 2-11
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
To verify the routing table settings:
1. Select Network>Routi
ng>Routing Table in the left-hand frame.
2. Verify the displayed settings.
To configure the VPN settings with the VPN Wizard:
1. Select W
izards>VPN in the left-hand frame to launch the VPN Wizard.
2. Select LAN-
to-LAN and click Next.
3. Ensure Local Static IP <-> Remote Static IP is selected and click Next.
4. Enter 200.0.0.xxx (where xxx can be between 2 and 254) in the Remote
Gateway IP Address field and click Next.
To Next Page
Loading...
