Configuration VPN/DSL Security Option
2-12 24-10618-155 Rev. A
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
5. Select Standard (128/168-bit encryption strength), enter master in the
Preshared Secret field, and click Next.
6. Enter the following re
mote IP address into the IP field according to the router
you are configuring.
Front End Router: 200
.0.0.0
Back End Router: 192
.168.1.0
7. Change the Ne
tmask to 255.255.255.0 and click Next.
8. Enter the following local IP address into the IP field according to the router
you are configuring.
Front End Router: 192
.168.1.0
Back End Router: 200
.0.0.0
9. Change the Ne
tmask to 255.255.255.0 and click Next.
10. Review the VPN tunnel settings and click Next to continue.
11. Click Finish to complete the configuration.
To Next Page
Loading...
