EasyManua.ls Logo

Johnson Controls TIWM006B22S - Maintenance and Repair Safety

Johnson Controls TIWM006B22S
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
P5417089
When the at panel is opened (closed) or the air lter is attached (removed), hold them rmly. If not, it
may cause falling or injury.
About Wireless Controller
Pay attention to the following to use the batteries correctly. If not, it may cause liquid spill or burst.
1. Never use new and old batteries together.
2. Never use the different types of batteries (for example manganese battery and alkaline
battery) together.
3. When the wireless controller is not used over a prolonged period of time (more than 2 or 3 months),
remove the batteries from the wireless controller.
After removing the old batteries, wait 5 or more seconds before inserting the new ones.
Repair / Relocation / Removal
Others
Turn OFF all power at the main power source before performing maintenance work. Failure to do so can
result in damage to internal components with severe or fatal electrical shock.
Insulate all electrical components and connections from exposure to moisture. Failure to do so can result
in an electrical short, re.
Do not tamper with or attempt to "repair" electrical wiring or connections. Call your installer or electrical
contractor. Serious or fatal injury can occur.
Perform all maintenance work on a rm and stable platform to minimize the risk of injury.
Do not attempt to "clean" indoor unit components with liquid or powdered cleaning agents during
maintenance. Electric shock, sparks, ame, and serious or fatal injury can occur.
System piping is charged with refrigerant and highly pressurized.
When the air conditioner is to be repaired, transported to a new location or removed, contact your
distributor or contractor. Use the specied refrigerant indicated on the labels of outdoor unit.
Do not change the unit with anything other. If the repair and the installation are not completed, it may
cause electrical shock or re.

Related product manuals