Johnson Controls Unisab III - Page 46

Timer 9
1.
For SAB Mk2 110/128/163, SAB 80 and SABCube.
2. For compressors with prelubrication delay = 0 sec.
3. For SV 10/20 and FV 10/20.
4. SAB 120→151 and SAB 193→355.
Timer 10
1. For SAB 110, 128, 163, 202 and VMY compressors.
2. For SV 10/20 and FV 10/20.
3. For GSV/RWF.
4. For SAB 80.
5. SAB 120→151 and SAB 193→355.
Timer 11
1. For SAB 202, SAB Mk3 and VMY Mk3, SV 10/20 and FV 10/20.
2. For SAB 163 Mk1.
Timer 13
1. For SAB 202, SAB Mk2, SAB Mk3, VMY, SAB 80, SAB 283 Mk1, SAB 355 Mk1, SV
10/20 and FV 10/20.
2. For SAB 163 Mk1
3. SAB 120→151 and SAB 193→355.
4. SABCube (same default value as for timer 31 Start unload)
Timer 14
1. For all compressors except SAB 120→151 and SAB 193→355.
2. For SAB 120→151 and SAB 193→355.
Timer 31
1. For FV17/19 and FV25/26.
2. For SAB xxx HR/SABCube.
3. SABCube
Timer 34
1. For Gram GST and SAB 120→151.
2. For SABCube.
Operating Unisab III control
44/48
Operating manual - Unisab III
005650-en 2013.10