Johnson Controls VFD66 Drive - Fault Clearing and Service Guidance

VFD66 User Guide 37
Issue Number: 2 www.johnsoncontrols.com
Safety information Rating data
Mechanical
installation
Electrical
installation
De-rating
Keypad and
display
Parameters
Diagnostics
Technical
specifications
UL Listing
8.1 Fault clearing
Drive faults may be cleared by one of the following methods:
• Removing and re-applying power to the drive.
• Pressing the stop/reset button on the keypad.
8.2 Repairs and replacements
Field repairs of the VFD66 Control should not be made. In case of a defective or
improperly functioning control, contact your nearest Authorized Johnson Controls/
PENN® Distributor or Sales Representative. When contacting your Johnson Controls/
PENN distributor, have the model number of the control available. This number can be
found on the label on the side of the control.