6. System Configuration
6.1 System Configuration
After the installation and test operation of the room air conditioner have been completed, it should be operated and
handled as described below. Every user would like to know the correct method of operation of the room air
conditioner, to check if it is capable of cooling (or heating) well, and to know a clever method of using it.In order to
meet this expectation of the users, giving sufficient explanations taking enough time can be said to reduce about
80% of the requests for servicing. However good the installation work is and however good the functions are, the
customer may blame either the room air conditioner or its installation work because of improper handling. The
installation work and handing over of the unit can only be considered to have been completed when its handling has
been explained to the user without using technical terms but giving full knowledge of the equipment.
21
YSCC24FSAADG System Configuration
Domestic Air Conditioner
To Next Page
Loading...
Need help?
General
