Johnson Controls York YD - FIGURE 8 - Typical Refrigerant Vent Piping; FIGURE 7 - Schematic of a Typical Piping Arrangement

JOHNSON CONTROLS
21
SECTION 2 - INSTALLATION
FORM 160.69-N2
ISSUE DATE: 7/31/2015
2
FIGURE 7 - SCHEMATIC OF A TYPICAL PIPING ARRANGEMENT
LD08529
EVAPORATOR
FIGURE 8 - TYPICAL REFRIGERANT VENT PIPING
FLANGED JOINT
TO PERMIT PIPING
DISASSEMBLY
CONDENSATION
TRAP
DUAL RELIEF
VALVES
VENT TO ATMOSPHERE
SUPPORT VENT PIPING TO AVOID
STRAIN ON RELIEF PIPING
FLEXIBLE CONNECTOR
CONDENSER
COOLER
SEE NOTE
NOTE: SHELLS MAY BE FURNISHED WITH
ONE OR TWO RELIEF VALVES,
DEPENDING ON SHELL SIZE.
LD03863a