Failure and alarm screen
Figure 65: Failure and alarm screen
If a failure occurs, the red Failure light lights and the chiller stops. Press the FAIL/ALARM button to
access the Failure and Alarm screen for detailed information about the failure.
Failure
When a failure occurs, an audible alarm sounds (buzzer). The type of failure lights up on the Failure
and Alarm screen. Press the BUZZER STOP button to silence the buzzer. This can be done even
before the failure is addressed. To view the details of the failure and the remedy, press the lighted
button (the name of the failure).
After fixing the failure, press the FAILURE RESET button to reset the lighted failure button. If you
press the FAILURE RESET button before fixing the failure, the lighted failure button remains visible
and the buzzer sounds again.
If an alarm occurs, the orange Alarm light lights. Press the FAIL/ALARM button to access the
Failure and Alarm screen for detailed information about the alarm.
Alarm
When an alarm occurs, the type of alarm lights up on the Failure and Alarm screen. A buzzer does
not sound. To view the details of the alarm and the remedy, press the lighted button (the name of
the alarm).
After fixing the alarm, press the ALARM RESET button to reset the lighted alarm button. If you
press the ALARM RESET button before fixing the alarm, the lighted alarm button remains active.
133YHAU-C Single Effect Steam-Fired Absorption Chiller
To Next Page
Loading...
Need help?
General
