Feel the resistance increase/decrease suddenly or fell no
resistance (JPE5100)
Possible causes:
7. Console is damaged
or the console cable
is not connected
properly
8. Console cable is
damaged.
9. Control board is
damaged.
10. Electromagnet brake
set is damaged.
11. Gap between the
electromagnet and
the copper disc of
the generator is too
wide
Fix:
8. Remove the console and check if the console
cable has been connected properly.
9. Console cable is damaged, replace it with a new
one.
10. Remove the side covers of the fitness and check
if the terminal of the control board has been
connected properly. Control board is damaged,
replace it with a new one.
11. Electromagnet brake set is damaged, replace it
with a new one
12. (1)Loosen the assembly screws of electromagnet
(2) With a c-vice press the electromagnet to
narrow the gap then check again.
.
2-5 Revision: 1.0 Date: 2001/06/01
To Next Page
Loading...
Need help?
General
