Johnson JPE-5100 User Manual

ROLLER REPLACEMENT PROCEDURE (JPE5100)
Tools required:
u Philips
screwdriver
u Hex key (4mm)
Procedure:
1. Remove the all of cover.
2. Move the pedal arm back
then pick up it.
3. Loosen the screw (A)
holding the wheel to the
frame with the hex key
(4mm), and then replace it
with a new one.
4. Reverse the steps to
install the side cover.
A
3-24 Revision: 1.0 Date: 2001/06/01

Johnson JPE-5100 Specifications

General

Brand	Johnson
Model	JPE-5100
Category	Elliptical Trainer
Language	English