Name: Johnson JPE-5100
Brand: Johnson
Rating: 4 (1 reviews)

To Next Page

To Previous Page

SENSOR REPLACEMENT PROCEDURE (JPS)

Tools required:

u Philips

screwdriver

Procedure:

1. Loosen the screws from

the side cover with the

screwdriver.

2. Disconnect the sensor

cable from the control board.

3. Loosen the screws

holding the sensor to the

frame.

4. Replace the sensor with a new one.

5. Tighten the screws holding the sensor to the frame.

6. Reconnect the sensor cable to the control board.

7. Install the side cover.

3-15 Revision: 1.0 Date: 2001/06/01

Questions and Answers:

Need help?

Do you have a question about the Johnson JPE-5100 and is the answer not in the manual?

Johnson JPE-5100 Specifications

General