Name: Johnson JPE-5100
Brand: Johnson
Rating: 4 (1 reviews)

To Next Page

To Previous Page

No pulse display on the console (Hand pulse type)

(JPC/B/S/E)

Possible causes:

1. Connection of hand

pulse cable.

2. Hand pulse cable is

damaged.

3. Console is damaged.

Procedure:

1. Remove the console to check if the terminal of hand

pulse cable has been connected to PCB well.

2. Replace the hand pulse cable with a new one.

3. Replace the console with a new one

2-10 Revision: 1.0 Date: 2001/06/01

Questions and Answers:

Need help?

Do you have a question about the Johnson JPE-5100 and is the answer not in the manual?

Johnson JPE-5100 Specifications

General