25 / 41
Work Mode Description
Standby mode
After the device powers on, it is in standby mode. Once it is waken up, the device will work as expected. Wake up
methods as above can referenced.
The preset data upload time interval after waking up is more than or equal to 60 seconds, the GPS module will
sleep.
The preset data upload time interval after waking up is less than 60 seconds, the GPS module of the device will
work constantly. In this working status, the power consumption will be greatly increased and shorten the working
time of the device.
Deep sleep mode
By default, if the remaining power of the device is less than 5%, it enters deep sleep mode. In the deep sleep
mode, the GSM module and GPS module of the device is closed, and only swiping RFID card, and charging are
able to wake up the device.
Notification:
After swiping the card to unlock the device, if the device detects there is no other operation, it will continues to
sleep and not be forced to wake up for 10 minutes. Insert the lock rope and the device will automatically lock.
Tracking mode
The device is in continuous working status, and the device still keeps tracking mode even when restarting, unless
the user turns off the tracking mode. When the remaining power is less than 5%, it enters the default deep sleep
mode.
Working Hours
The working hours generates based on the indoor test under normal temperature, without SMS wake-up, it
is for reference only. During the actual use, there will be differences due to differences in ambient
temperature, satellite positioning, and working modes. Please take the working time in actual use as final.
To Next Page
Loading...