JoinTech JT709A - Definition of Indicator Status and Buzzer Sound; Indicator Light Status; Buzzer Sound

16 / 41
Definition of Indicator Status and Buzzer Sound
Indicator light status
LED Indicators
Status
Description
Blue light
Cellular network/GPS
indicator
Flashing once every 1
second (slow flashing)
The device not located(GPS), and not
registered or connected to a cellular network
Flashing once every 3
second
The device not located(GPS), and registered
and connected to the cellular network. it is
sending data
Flashing twice every 3
second
Low battery(less than 30%)
Flashes three times every
3 seconds
The device located(GPS), and registered and
connected to the cellular network. it is sending
data
OFF
The device is in sleep or deep sleep state
after waking up the device,blue led will be
blinking.
Red light->Green light
charging->full
Red light ON constantly
Charging
Green light ON constantly
Full
OFF
NOT charging
Buzzer sound
Operation and conditions
Description of buzzer sound
Swipe unauthorized RFID
card
The buzzer beeps for 3 seconds
Remote Unlocking by static
password
Remote Unlocking by
dynamic password
Swipe RFID card, but out of
the preset GEO-FENCE
Batch Add authorized ID
more than
20 RFID cards
Swipe authorized RFID
card
The buzzer beeps once
Add authorized ID by