38 / 41
fence is generated.
⑥Exit the fence: the device leaves the fenced area and generates a fence alarm;
⑦ Low battery: If it is less than 30% (default, can be modified) for more than 10 minutes, a low battery alarm
is considered.
⑧Motor stuck: When the motor has over-travel or stuck, an alarm data will be generated.
⑨The back cover opened: When the device detects that the back cover is open, an alarm data is triggered.
⑩Speeding: When detect speed of the device more than preset value(default 120km/h) and Continue to
exceed the speed for preset value(default 10 seconds), an alarm data is triggered.
Alarm switch configure
User can disable GPRS/SMS channel for each alarm type. Please configure the alarm switch function on the
Jointech Cloud Platform, refer to the "Manual of Jointech Cloud Platform".
To Next Page
Loading...
