4 / 41
Copyright and Disclaimer
Copyright © Shenzhen Joint Technology Co.,Ltd. User can read and photocopy this document, but without the
permission of Jointech, please do not modify this document or quote design pictures of products in this document.
All the contents in this document are currently accurate. However, due to the continuous iteration and update
of products, we may update the manual from time to time. The manual you are reading reflects the basic functions
and technical indicators of the product at the time the product manual was written. We strive to give a complete
and clear description as much as possible so that you can easily use our products. There may be inaccurate
technical expressions of some content. We will correct and update the manual content in time based on customer
suggestions and feedback. This manual is subject to update without notice.
The user needs to install and fix the product, charge the battery according to the specifications, and dispose
of the waste parts and batteries of the product in accordance with local policies and regulations. Jointech is not
responsible for any loss, injury, environmental pollution, etc. caused by using or quoting this product.
Warranty Policy Statement
The warranty period is 12 months from the date of delivery.
Any defects, malfunctions and damages caused by improper use, unauthorised disassembly and alteration of
the product are not applicable to this warranty policy.
The warranty period is limited to repairing defects or replacing defective parts.
Repairing or replacing parts under the terms of this warranty period does not extend the warranty period.
Brief Introduction
JT709A is a mobile asset monitoring and management product based on the JT701 electronic smart lock.
The product currently supports 2G/4G communication and has a built-in battery of 4500mAH. JT709A products
have been optimized and improved in low power consumption and functional design.According to the demand of
power consumption, deep dormant mode and tracking mode are added to the existing dormant mode.The default
50 RFID authorization cards will be expanded to 500 RFID authorization cards.In terms of security, there are four
unlocking methods including keyless design, SMS/Bluetooth/RFID/cellular network remote unlocking; In terms of
To Next Page
Loading...