3. Put the cables below the steering cable rollers (E)
below the tunnel cover.
4. Tension and adjust the steering cables. Refer to
To
examine and adjust the steering cables on page 44
.
8.9 Belts
8.9.1 Belts overview
Belt 1
Transmission
belt
Engine pulley to
transmission pul-
ley
Belt 2 Main belt
Engine pulley to
intermediate pul-
ley
Belt 3 Equipment belt
Intermediate pul-
ley to cutting
deck
8.9.2 To lubricate the belt adjuster
The belt adjuster must be lubricated regularly with a
good quality molybdenum disulphide grease.
659 - 001 - 11.04.2018 Repair instructions - 45
To Next Page
Loading...
