10 Technical data
10.1 Technical data
FR 2216MA
Dimensions
Length without cutting deck, mm 1960 1960 1960
Width without cutting deck, mm 883 883 883
Length including cutting deck, mm 2243 2243 2243
Width including cutting deck, mm 994 994 994
Height, mm 1120 1120 1120
Weight without cutting deck, with empty
tanks, kg
231 237 255
Wheel base, mm 887 887 887
Track width, front, mm 712 712 712
Track width, rear, mm 627 627 627
Tire dimensions 165/60-8 165/60-8 165/60-8
Tire pressure, rear – front, kPa / bar / PSI 60 / 0.6 / 8.5 60 / 0.6 / 8.5 60 / 0.6 / 8.5
Max. gradient, degrees ° 10 10 10
Engine
Brand / Model Briggs & Stratton/
Intek 3125 EFM
Briggs & Stratton/
Intek 4155
Briggs & Stratton/
Intek 4155
Nominal engine output, kW
1
6.7 9.6 9.6
Displacement, cm
3
344 500 500
Max. engine speed, rpm 3000 ± 100 2900 ± 100 2900 ± 100
Fuel, min. octane grade 91 91 91
Fuel tank volume, litres 10 10 10
Oil Class SF, SG, SH or
SJ SAE40, SAE30,
SAE10W-30,
SAE10W-40 or
SAE5W-20
Class SF, SG, SH or
SJ SAE40, SAE30,
SAE10W-30,
SAE10W-40 or
SAE5W-20
Class SF, SG, SH or
SJ SAE40, SAE30,
SAE10W-30,
SAE10W-40 or
SAE5W-20
Oil tank volume, litres 1.4 1.4 1.4
Start motor Electric start 12V Electric start 12V Electric start 12V
Transmission
Brand Tuff Torq Tuff Torq Tuff Torq
Model K46H K46H K574 / KTM 10L
Oil, class SF-CC SAE 10W/40 SAE 10W/40 SAE 10W/50 Synthet-
ic
Max. speed, km/h 9 9 9
Electrical system
Type 12V, negative earthed 12V, negative earthed 12V, negative earthed
1
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production en-
gine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from
this value. Actual power output for the engine installed on the final product will depend on the operating speed,
environmental conditions and other values.
52 - Technical data 659 - 001 - 11.04.2018
To Next Page
Loading...
