English – 9
PRESENTATION
Cutting unit
FR 13 have a cutting unit with rear ejection, i.e. the
grass cuttings are thrown out behind the cutting
unit.
Lowering of the cutting unit (cutting position)
Lifting of the cutting unit (transport position)
Lift lever for cutting unit
The lift lever is used to set the cutting unit in trans-
port or cutting position.
If the lever is pulled back the unit will lift up and the
blades will automatically stop rotating (transport
position).
If the lock button is pressed and the lever is moved
forward the unit will be lowered and the blades will
automatically start rotating (cutting position).
The lever can also be used to temporarily regulate
the cutting height, e.g. for a small mound in the
lawn.
To Next Page
Loading...
