10 – English
PRESENTATION
!
WARNING!
Petrol/gasoline is highly inflammable.
Observe care and fill up with fuel
outdoors (see safety instructions).
Fuelling
The engine should be run on 85 octane (or higher)
unleaded petrol/gasoline (no added oil). Environ-
mentally adapted alkylate fuel, such as Aspen, is
also recommended.
Lever for adjustment of cutting height
With this lever the cutting height can be adjusted to
9 different positions.
Cutting unit with rear ejection, 40-90 mm cutting
height.
Seat
The seat has a jointed attachment on the front
edge and can be tipped forward.
The seat can also be adjusted lengthways.
Release the knobs/lever under the seat and adjust
it forwards or backwards to the required position.
Lock the adjustment with the wheels.
To Next Page
Loading...
