2 – English
These symbols are on the machine and in the operator’s manual.
Study them carefully so that you know what they mean.
Read the operator’s manual
Reverse Neutral Fast Slow Engine off Battery Choke Fuel
Oil pressure Cutting height Backwards Forwards Ignition Use eye and
hearing protection
Clutch in Clutch out Parking brake Brake Clutch Warning
Soundlevel Warning! Warning! Never drive across a slope
Rotating blades. Risk that the machine can tip over
Never use the machine if persons,
especially children, or animals,
are in the vicinity.
Never carry passengers on the
machine or equipment.
1. Starting instructions
2. Read the instructions
3. Check the engine’s oil level
4. Check the hydrostat’s oil level
5. Lift up the cutting unit
6. Put the gear shift/hydrostat
pedal in neutral
7. Brake
8. If the engine is cold use the
choke
9. Start the engine
10. Release the parking brake
before driving
Keep hands and feet away
from under the hood when
the engine is running.
N
R
EXPLANATION OF SYMBOLS
11. Switch off the engine and
take off the ignition cable
before repairs or
maintenance
Drive very slowly
without the cutting unit.
!
European standard for
machine safety
1.
2.
3.
9.
8.
7.
6.
5.
4.
10.
11.
To Next Page
Loading...
