Jonsered FR2115MA - Driving the Jonsered Rider; Pre-Start Operational Checks; Engine Starting Procedure

16– English
DRIVING
3. On FR 2111
Put the gear shift lever in the N position
(neutral).
Starting the engine
1. Lift up the mowing deck by pulling the lever
backwards to the locked position (transport
position).
2. Activate the parking brake. This is done as
follows:
• Press down the brake pedal (1).
• Press in the lock button on the steering
column (2).
• Release the brake pedal while keeping the
button pressed in.
The parking brake’s lock is automatically
disengaged when the brake pedal is pressed
down.
The FR 2111 has the brake pedal and lock
button on the right-hand side.
Before starting
• Read the safety instructions and information
concerning the placement of controls and
functions before starting.
• Carry out daily maintenance before starting
(see the maintenance schedule).
Adjust the seat to the desired position.
IMPORTANT INFORMATION
Do not press down the reversing lock button
on the lever when engaging the neutral
position. Otherwise this will activate the start
lock function.
1
2
N
8009-249
6007-002H
8009-253
8009-430
IMPORTANT INFORMATION
The air intake grille in the engine cover
behind the driver’s seat must not be
blocked by, for example, clothing, leaves,
grass or dirt.
Impaired cooling of the engine. Risk of
major engine damage.