EasyManua.ls Logo

Jonsered FR2115MA - Throttle Cable Adjustment; Fuel Filter Replacement

Jonsered FR2115MA
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26 English
6008-033
8009-108
6008-034
6008-032
MAINTENANCE FR 2111, FR 2113
Replacing the fuel filter
Replace the new fuel filter mounted on the supply
line after every 100 hours (once per season) or
more frequently if it is clogged.
Replace the filter as follows:
1. Fold up the engine cover.
2. Move the hose clips away from the filter.
Use a pair of flat pliers.
3. Pull the filter away from the ends of the hose.
4. Press the filter into the ends of the hose. If
necessary, a soap solution can be applied to
the ends of the filter to simplify assembly.
5. Move the hose clips back towards the filter.
2. Pull the throttle cables casing as far as possible
to the right and check that the choke is fully
actuated.
3. Tighten the clamping screw.
Adjusting the throttle cable
The throttle cable may need to be adjusted, if the
engine does not respond as it should when
accelerating, if it produces black smoke or
maximum revs are not reached.
1. Loosen the clamping screw (by the arrow), and
slide the throttle to the choke position.
4. Pull back the throttle to the full throttle position
and check that the choke is no longer actuated.

Table of Contents

Other manuals for Jonsered FR2115MA

Related product manuals