Jonsered FR2218FA2 - Technical Data; Machine Dimensions; Engine Specifications; Electrical System Data

30 – English
TECHNICAL DATA
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the
engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power
output for the engine installed on the final machine will depend on the operating speed, environmental conditions and other values.
FR 2218FA2 FR 2218FA2 4x4
Dimensions
Length without cutting unit, mm/ft 2020/6,61 2020/6,61
Width without cutting unit, mm/ft 890/2,92 890/2,92
Height, mm/ft 1150/3,77 1150/3,77
Operating weight with cutting deck, kg/lb 282-285/622-628 303-306/668-675
Wheel base, mm/ft 887/2,9 887/2,9
Track width, front, mm/ft 712/2,34 715/2.35
Track width, rear, mm/ft 627/2,06 625/2,05
Tyre dimensions 16 x 7,5 x 8 16 x 7,5 x 8
Air pressure, rear - front, kPa / bar / PSI 60 (0,6/8,5) 60 (0,6/8,5)
Max. gradient 10° 10°
Engine
Brand / Model Kawasaki / FR541V Kawasaki / FR541V
Nominal engine output, kW (see note 1) 10.6 10.6
Displacement, cm
3
/cu.in 603/36,8 603/36,8
Oil synthetic, class SJ-CF
SAE 30 or SAE 10W/30,
SAE 10W/40
SAE 30 or SAE 10W/30,
SAE 10W/40
Oil volume incl. filter 1,9/2.0 1,9/2.0
Oil volume excl. filter, litres/USqt 1,7/1,8 1,7/1,8
Starting Electric starter Electric starter
Max.motor speed, r/min 2900 ± 100 2900 ± 100
Fuel, minimum octane grade lead-free
87 (max. methanol 5%, max.
ethanol 10%, max. MTBE 15%)
87 (max. methanol 5%, max.
ethanol 10%, max. MTBE 15%)
Tank volume, litres/USqt 10 10
Electrical system
Type 12 V, negative earthed 12 V, negative earthed
Battery 12 V, 24 Ah 12 V, 24 Ah
Main fuse Flat pin, 15 A. Flat pin, 15 A.
Spark plug NGK BPR4ES NGK BPR4ES
Electrode gap, mm/inch 0,75/0,030 0,75/0,030
Transmission
Brand Tuff Torq K46 K 574 KTM 10L
Oil, class SF-CC SAE 10W/40 SAE 10W/50 Synthetic
Forward speed, km/h. 0-9 0-9
Reverse speed, km/h 0-6 0-6
Cutting unit
Type JC 103 JC 103
JC 112 JC 112