English – 31
TECHNICAL DATA
Note 2: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC. If the
machine can be equipped with different cutting decks, the noise emissions are stated in order starting from the cutting deck with
the smallest cutting width.
Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical statistical dispersion
(standard deviation) of 1.2 dB(A). If the machine can be equipped with different cutting decks, the noise pressure levels are stated
in order starting from the cutting deck with the smallest cutting width.
Note 4: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard deviation)
of 0.2 m/s
2
(steering wheel) and 0.8 m/s
2
(seat).
EC-declaration of conformity (Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel.: +46-36-146500, hereby declares that Jonsered FR 2218 FA2 and FR 2218
FA2 4X4 from 2013’s serial numbers and onwards (the year is clearly stated in plain text on the rating plate with subsequent serial
number), complies with the requirements of the COUNCIL’S DIRECTIVE:
of May 17, 2006 ”relating to machinery” 2006/42/EC
of December 15, 2004 ”relating to electromagnetic compatibility” 2004/108/EC.
of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
Information regarding noise emissions and the mowing width, see Technical data
The following harmonised standards have been applied: EN ISO 12100-2, EN-836.
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, has issued reports regarding the
assessment of conformity according to annex VI of the COUNCIL’S DIRECTIVE of May 8, 2000 ”relating to the noise emissions in
the environment” 2000/14/EC.
The certificates have the numbers: 01/901/200
Huskvarna December 5, 2012
Claes Losdahl, Development Manager/Garden Products (Authorized representative for Husqvarna AB and responsible for
technical documentation.)
Technical data concerning the cutting unit
Cutting unit JC 103 JC 112
Cutting width, mm/inch 1030/41 1120 / 44.1
Cutting heights, 7 positions, mm/inch 25-75/0.98-2.95 25-75/0.98-2.95
Blade length, mm/inch 388/15.28 420 / 16,5
Technical specifications for sound and vibration levels
FR 2218FA2 FR 2218FA2 4x4
JC 103 JC 112 JC 103 JC 112
Noise emissions (see note 2)
Sound power level, measured dB (A) 97 97 97 97
Sound power level, guaranteed dB(A) 97 97 97 97
Sound levels (see note 3)
Sound pressure level at the operators ear, dB(A) 83 83 83 83
Vibration levels (see note 4)
Vibration level on the steering wheel, m/s
2
3,5 3,5 3.5 3.5
Vibration level in the seat, m/s
2
0,7 0,7 0,7 0,7
IMPORTANT INFORMATION When the service life of this product has been served and it is no longer used it should be returned
to the dealer or to an applicable station for recycling.
IMPORTANT INFORMATION We reserve the right to change specifications and designs without prior notice so as to implement
improvements. Note that no legal claims are valid on the basis of information in this manual. Use only genuine parts for repairs.
The warranty is not valid if non genuine parts are used.
To Next Page
Loading...
