6
–
English
KEY
T
O SYMBOLS
Symbols
These symbols are on the machine and in the instr
uctions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
• Approved hearing protection
This product is in accordance with
applicable EC directives.
F
ast
Slo
w
Stop the engine
.
Chok
e.
Fuel
Oil le
vel
Cutting height
Bac
kwards
F
orwards
Ignition
Hydrostatic free
wheel
P
arking brake
Noise emission to the en
vironment
according to the European Community’s
Directive. The machine’s emission is
specified in the Technical data chapter and
on the label.
Clutch in
Clutch out
Warning: rotating parts. Keep hands and
feet clear.
Rotar
y blades Keep hands and feet
away from under the hood when the
engine is running
Hot surf
ace.
Ne
ver drive across a slope
Ne
ver use the machine if persons,
especially children, or animals, are in the
vicinity
Never carry passengers on the machine or
equipment
Dr
ive very slowly if no cutting unit is fitted
Cutting dec
k must be fitted before
driving at full speed.
Br
ake
Switch off the engine and tak
e off the ignition
cable before repairs or maintenance
To Next Page
Loading...
