32 – English
Dimensions Jonsered FRM 13 AUTOMATIC
Length without cutting unit 2000 mm
Width without cutting unit 960 mm
Height 1060 mm
Service weight 245 kg including cutting unit
Wheel base 820 mm
Track Front 715 mm, rear 625 mm
Tyre size 16 x 6,50 x 8
Tyre pressure, front & rear 60 kPa (0,6 kp/cm
2
)
Max. gradient 15°
Engine
Manufacture Briggs & Stratton model 28N707
Power 9,2/12,5 kW/h.p.
Displacement 465 cm
3
Fuel Min. 85 octane unleaded
Tank volume 7 litres
Oil SAE 30 or SAE 10W/30 class CD-SF
Oil volume 1,4 litres
Start Electric starter
Electrical system
Type 12 V, negative earth
Battery 12 V, 24 Ah
Spark plug Champion CJ8 or J8, electrode gap = 0,7-0,8 mm
Transmission
Manufacture Tuff Torq K55
Oil SAE 10W/30, class CD-SF
Cutting unit
Type 2-blade unit Mulcher 90
Cutting width 900mm
Cutting height 9 pos. 45-95 mm
Blade diameter 410 mm
Noise level 100 dB(A)
TECHNICAL DATA
We reserve the right to change technical specifications without prior notice.
Note that no legal claims are valid on the basis of information in this manual.
Use only genuine parts for repairs. The warranty is not valid if non genuine parts are used.
When this product is worn out or no longer used it should be returned to
the dealer or other appropriate body for recycling.
´*xnJ¶6y¨
To Next Page
Loading...
Need help?
General
