2 – English
These symbols are on the machine and in the operator’s manual.
Study them carefully so that you know what they mean.
Read the operator’s manual
Reverse Neutral Fast Slow Engine off Battery Choke Fuel
Oil pressure Cutting height Backwards Forwards Ignition
Hydrostatic free wheel Use eye and hearing protection Parking brake Brake Warning
Sound- Warning! Warning! Never drive across a slope
level Rotating blades. Risk that the machine can tip over
Never use the machine if persons, especially
children, or animals, are in the vicinity.
Starting instructions
Read the instructions
Check the engine’s oil level
Check the hydrostat’s oil level
Lift up the cutting unit
Put the gear shift/hydrostat pedal in
neutral
Brake
If the engine is cold use the choke
Start the engine
Release the parking brake before
driving
!!
!!
!
Drive very slowly
without the cutting unit.
Keep hands and feet away
from under the hood when
the engine is running.
N
R
EXPLANATION OF SYMBOLS
Speed limiter pedal forwards
Neutral
Speed limiter pedal reverse
Switch off the engine and take off
the ignition cable before repairs or
maintenance
European standard for
machine safety
Never carry passengers on the
machine or equipment.
To Next Page
Loading...
Need help?
General
