— 10 —
back to the Away” position again will reset the timer. This
can be helpful when determining the correct dial setting.
HINTS AND TIPS
1. If the Clapper Plus does not turn on
while Clapping
a. Make sure the Clapper Plus is plugged in properly.
When the clapper is rst plugged in the red lights
on the front of the Clapper Plus will sequence
through a startup pattern.
b. Make sure the Appliance is plugged into the Clap
II or Clap II receptacle.
c. Make sure the Appliance is turned on. You can tell
if the appliance is on by the orange glow next to the
Clap II or Clap III receptacle.
d. Make sure the Claps are loud enough and have
the correct timing. See above for the timing of
the claps.
e. e Clapper Plus is protected by a non-replace
able fuse. If one of the sockets is overloaded the fuse
will blow and will permanently disable the Clapper.
f. Don’t cover the Clapper with drapes or place
behind furniture that will block the Clap’s sound
To Next Page
Loading...
Need help?
General