— 12 —
seconds and plug it back into the wall socket.
ii. To reset the Remote remove and replace the battery.
YOU CAN OPERATE UP TO 4 CLAPPER
PLUS UNITS INDEPENDENTLY OF
EACH OTHER
Overview
Normally, if you have a Clapper Plus in one room and
a second Clapper Plus in the next room, the Remote
Control(s) will control both units. To have the Clapper
Plus units work independently, follow the instructions
below:
The Clapper Plus works with Radio Frequencies much
like your TV. To operate multiple Clappers independently
you need to set the Radio Frequency, “Channel”, for
each Clapper Plus base units and also for its remote.
Each Clapper Plus and its remote can be set to channel
1, 2, 3 or 4.
When rst plugged in, the Clapper Plus unit start out set
at channel 1. When the battery is put into the remote, the
remote’s channel is also set to 1.
Each Clapper Plus remote control has two buttons, Button
II and Button III. These normally are used to control the
To Next Page
Loading...
Need help?
General