— 6 —
Clap Sensitivity
You can adjust your Clapper Plus to respond to soft or loud
claps, as well as adjust for the noise level in your room.
By adjusting the sensitivity dial on the Clapper you can
adjust the Clapper’s sensitivity to your claps and reduce
detecting unwanted noise. Turning the dial fully counter
clockwise(# 9) is the highest sensitivity. In this position
the Clapper will detect soft claps.
As you turn the dial clockwise the sensitivity is reduced.
This give you control over the claps it will detect and help
you reduce false activation due to external noises.
Clap Detection Lights
The three red lights on the face of the Clapper Plus will
help you determine the proper way to clap your appliances
on or off. Each clap detection light will glow when a proper
clap (or similar sound) is detected.
Claps that are too soft will not be detected. Claps that are
too fast together or too long apart will be rejected as noise
and as a result the appliance will not turn on. When the
Clapper Plus detects the rst clap the rst light will glow.
The second light will glow if a second clap is detected
about ½ second after the rst clap occurs. If the Clapper
Plus does not detect a third clap, it will activate the
To Next Page
Loading...
Need help?
General