4.3.3 PERSONAL CHANNELS (TR20 PLUS ONLY)
Under this menu item it is possible to select personal channels. If any personal channels are
selected, a «P» is indicated in the upper right corner of the display. Using the «CH» (4) and
the arrow keys (2&9) will then scroll trough only the personal channels. If no personal
channels are selected, all channels can be selected via the «CH» key.
How to deselect personal channels:
Use arrow keys (2&9) to move to the selected channel that are marked with an aste-
risk. Press “ENTER” to deselect channel. Deselecting of CH16 is only possible when
all personal channels are deselected.
To select personal channels, enter the channel menu
and use the arrow keys (2&9) to select channels.
Pressing «Enter» (11) will select them as personal
channels. Any number of channels can be selected.
When finished, press the «Menu» key (3).
Note! Personal channel selection is not available
on the Tron TR20 GMDSS version.
4.3.4 SCANNING (TR20 PLUS ONLY)
Scanning of channels will be initiated by pressing the “CH” button for more than 1 second.
If personal channels are selected (look for “P” in upper right corner of the display) they are
the only channels that will be scanned. Otherwise all channels will be scanned.
The scanning function can be stopped in two ways. Pressing the “CH” bottom stop the
scanning and return to your working channel. Pressing the “Enter” bottom stop the
scanning at the previous channel.
NOTE!
The “PTT” bottom are disabled during scanning. Scanning must be stopped before the
radio can transmit. The receiver power consumption is doubled during scanning.
28
To Next Page
Loading...
Need help?
General
