• Watch: Watch (Guard) is to set a view position and duration to watch the point.
• Scan: The PTZ cameras can be programmed to move within the configurable PTZ limits (left/right,
up/down). When scan limits are set, the H-Scan, V-Scan, Variable Scan, Random Scan, Frame Scan is
performed only in the limited surveillance area.
• Task: A scheduled task is a preconfigured PTZ action that can be performed automatically at a specific
time.
• RS485: You can set RS485 protocols here. (Please contact the local retailer or PTZ camera provider for
proper settings.). Also, you can swap the PTZ controls here.
4.1.8 Camera
You can vide the IP camera information and Logs. Also, manage IP Camera users update IP camera here.
4.2. Recording and Playback
4.2.1 Recording
Note: After the system booted up, it is in 24-hour regular recording mode by default. If necessary, you can set
record type and time in Record Settings: Main menu -> Record
To Next Page
Loading...
Need help?
General
